Makefast Workshop Offers Material Hacks for 3D Printing – 3DPrint.com


September 24, 2016 Facebook Twitter LinkedIn Google+ 3D Printed Articles


IMG_8478The team at Makefast Workshop is made up of the dynamic and brilliant Maura Atwater and Adam Kumpf, who bill themselves as Navigator and Melder, respectively. With their impressive resumes, enthusiastic engagement, and willingness to share, I couldn’t help but be intrigued by their latest foray into material mixing in 3D printing. Rather than thinking about ways that parts printed from different materials could be combined after printing, they examined the possibilities for intervening in the printing process while it is occurring to mix and change materials. What piqued their curiosity was a series of questions:

“[T]he componentized way of combining materials is just one way to create hybrid parts. What about parts that want to be fully encapsulated so they can’t come apart? How about adding materials that aren’t rigid, like sand or water? Or perhaps parts that are constrained by each other, but not firmly connected?”

They quickly recognized that one of the advantages of working with the type of open bed printer most commonly used by makers is that the print is available for tinkering while it is being created. So they set out to perform, and share, some experiments and what they learned when intervening in a print to fill the object with a liquid, metal, or sand.

IMG_8432Their first project was to create a can chiller that could have a liquid filling between a double walled outer layer. The design itself was downloaded from Thingiverse, and the liquid filling was made by mixing up a batch of highly salted water, necessary so that the water wouldn’t freeze, thereby expanding and cracking the walls of the print. The way to get the water between the walls of the print was to pause the print at a certain height, before the top of the walls were sealed and use a squirt bottle to pour the liquid between them, then restart the print to finish it off.

IMG_8490The second print intervention involved putting sand into a printed egg to make a maraca, but doing it in such a way that the egg would be completely sealed upon completion. They discovered that by pre-heating the sand to the temperature of the print bed, the cooling it would cause in the paused print when poured in could be minimized, creating a seamless print.

Their third, and final, project was the creation of a set of ball bearings by printing the bearing, pausing the print, and then inserting BBs for the creation of smooth rotation. This project had the most difficult workaround of all three. Instead of pausing the print in order to place the BBs, something which was causing the layers’ bond to weaken, they suggest inserting the BBs while the print is running but at a greatly reduced speed – obviously, not something you want to try after having too much espresso.

For a detailed summary of what was learned during the experiments, check out their blog posting and, in the spirit of open source, share your own experiences! Discuss further over in the MakeFast Workshop 3D Printing Hacks forum at 3DPB.com.IMG_8493

IMG_8478The team at Makefast Workshop is made up of the dynamic and brilliant Maura Atwater and Adam Kumpf, who bill themselves as Navigator and Melder, respectively. With their impressive resumes, enthusiastic engagement, and willingness to share, I couldn’t help but be intrigued by their latest foray into material mixing in 3D printing. Rather than thinking about ways that parts printed from different materials could be combined after printing, they examined the possibilities for intervening in the printing process while it is occurring to mix and change materials. What piqued their curiosity was a series of questions:

“[T]he componentized way of combining materials is just one way to create hybrid parts. What about parts that want to be fully encapsulated so they can’t come apart? How about adding materials that aren’t rigid, like sand or water? Or perhaps parts that are constrained by each other, but not firmly connected?”

They quickly recognized that one of the advantages of working with the type of open bed printer most commonly used by makers is that the print is available for tinkering while it is being created. So they set out to perform, and share, some experiments and what they learned when intervening in a print to fill the object with a liquid, metal, or sand.

IMG_8432Their first project was to create a can chiller that could have a liquid filling between a double walled outer layer. The design itself was downloaded from Thingiverse, and the liquid filling was made by mixing up a batch of highly salted water, necessary so that the water wouldn’t freeze, thereby expanding and cracking the walls of the print. The way to get the water between the walls of the print was to pause the print at a certain height, before the top of the walls were sealed and use a squirt bottle to pour the liquid between them, then restart the print to finish it off.

IMG_8490The second print intervention involved putting sand into a printed egg to make a maraca, but doing it in such a way that the egg would be completely sealed upon completion. They discovered that by pre-heating the sand to the temperature of the print bed, the cooling it would cause in the paused print when poured in could be minimized, creating a seamless print.

Their third, and final, project was the creation of a set of ball bearings by printing the bearing, pausing the print, and then inserting BBs for the creation of smooth rotation. This project had the most difficult workaround of all three. Instead of pausing the print in order to place the BBs, something which was causing the layers’ bond to weaken, they suggest inserting the BBs while the print is running but at a greatly reduced speed – obviously, not something you want to try after having too much espresso.

For a detailed summary of what was learned during the experiments, check out their blog posting and, in the spirit of open source, share your own experiences! Discuss further over in the MakeFast Workshop 3D Printing Hacks forum at 3DPB.com.IMG_8493

Source from..

Comments