US Aluminum Athorbot Dual extruder 3D Printer kit, 2-in-1 extruder, print single color, dual color, mixed color (M10)


Add to Wishlist
SKU: B07CZ94NMP Category: Tag:



  • Shipping from US
  • This multifunctional printer equals 4 different printers, which not only can print single color and dual color, but also support to print mixed color and graded color. This printer requires assembled by customers followed by the manual.
  • Mixed color: Upload the “Athorbot mix” firmware and it provides different functions to make mixing color by changing the mixing percentage on the LCD screen. Percentage 100 and 0 means single color.
  • Dual color: Upload the “Athorbot dual” firmware and it helps you to print samples with two different colors. Single color is also supported by this firmware.
  • This 3D printer are guaranteed for one year warranty. is 1 year technical support is guaranteed. Quality Assurance/Technical Assistance at| Email at | Live chat Skype: ghj205 Mon through Fri 6am – 5pm PST.
Couple serial:
1. Couple kit: Only 2-in-1 nozzle, two extruder motors which can be used to upgrade different DIY3D printers, such as CR-10, CR-10S, HICTOP, Anet E10, Anet A8, Anycubic 3D printers, etc.
2. Couple Buddy: Half-assembled with all METAL FRAME.
3. Couple M10: Self-assembled (DIY) with ALUMINUM FRAME.
4. Couple M20: Half-assembled with all Aluminum FRAME.
All couple series can print: Mixed color, dual color, graded color and single color.

Extruder, Nozzle suite and Wire were assembled before shipping. Wires are already connected to the control board & cables are also attached.

Filament: PLA, ABS, Wood, TPU, PVA, Nylon, HIPS, etc.

Printing volume: 7.48″ x10.63″ x 8.46″ (190*270*215mm)

Heated Bed: 3mm aluminum alloy platform
Temperature: Max 100 degree centigrade
Extruder: Max 250 degree centigrade
Control board: Support double extruder, such as one nozzle mixer color printing, double nozzle two color printing.
LCD screen: 2004 LCD Module Control, Interface
Power supply: Input: 100-240V, Output: 24V/14.6A
Software: both open-source and commercial software, such as Cura, Repetier-Host, or Simplify 3D, the Maker Select Plus 3D Printer is compatible with Windows, Mac OS X, and Linux.

What’s in the Box:
Athorbot Couple M10 3D printer kits
CD with Assembly instructions, user manual and warranty card
100g free PLA filament sample
Spare screws & Tools

Additional information
















There are no reviews yet.

Be the first to review “US Aluminum Athorbot Dual extruder 3D Printer kit, 2-in-1 extruder, print single color, dual color, mixed color (M10)”